Product
| BR065 plate heat exchanger | Dimensions (for reference only) | |||
| Technical parameter | Number of plates (Zhang) | A(mm) | L(mm) | |
| Maximum assembly area | 180m² | 3-300 | N*4.45 | 300-1950 |
| Pipe diameter | DN200 | |||
| Ripple depth | 3. 95mm | |||
| Maximum water treatment | 680m³/h | |||
| Maximum design pressure | 1. 6Mpa | |||
| Runner area | 0.0023m² | |||
| Board size | 1219*625 | |||
| Heat transfer coefficient | 2000-6000w/m² | |||
Specializing in the manufacture of plate heat exchangers
| Plate material | Suitable for fluid | the material of plaes | Lliquids suited for |
| Stainless steel (Su304.316, etc.) | Clean water, river water, oil, mineral oil | Su304.316 etc | Purified water、 river water 、edible oil |
Titanium and titanium fertilizer (Ti. Ti.-pd) | Sea water, salt water, salt | Ti. Ti.-pd | Seawater、 brine 、saletd matters |
20Cr,18Ni,6Mo (254smo) | Dilute sulfuric acid, dilute sulfate solution | 20Cr,18Ni,6Mo(254smo) | Dilute sulphunic acid 、the watery solution of dilutesulphunic saited 、matters inorganic watery solution |
| Nickel (Ni) | High temperature, high concentration of sodium | Ni | Hight temperature and high density caustic natrium |
HASTEL alloy (C276, D205, B2G) | Concentrated sulfuric acid, hydrochloric acid, phosphoric acid | HASTEL alloy (C276, D205, B2G) | Concentrated sulphunic acid、Hydrochloric acid、Phosphoryiation |
| Gasket material | °C | Suitable for fluid | the materials of gakesets | Range temperature | Liquids suited for |
| NBR (NBR) | -15 ～＋ 135 | Water, sea water, mineral oil, salt water | NBR | -15 ～＋ 135 | Water 、seawater 、mineral oil 、 brine |
| EPDM | -25 ～＋ 180 | Acid, alkali, fluid | F26 | -25 ～＋ 180 | Boiling、 water、 steam、 acid 、alkali |
| Viton | 0～＋ 180 | Hot water, steam, acid, alkali | viton | 0 ～＋ 180 | Acid 、alkali、 fluid |
Plate heat exchanger industry application selection reference table
Selection of plate heat exchangers for air conditioning heating (hot side water 90°C-70°C, cold side 50°C-60°C)
| Specification | Heat exchange load | Heat exchange area | Hot side flow | Cold side flow | Reference heating area | |
| KW | Kcal/h | m² | m³/h | m³/h | m² | |
| BR01-2 | 116 | 10 | 2 | 5 | 10 | 1250 |
| BR01-3.5 | 233 | 20 | 3.5 | 10 | 20 | 2500 |
| BR01-5 | 349 | 30 | 5 | 15 | 30 | 3750 |
| BR018-6.5 | 465 | 40 | 6.5 | 20 | 40 | 5000 |
| BR018-8 | 582 | 50 | 8 | 25 | 50 | 6250 |
| BR03-10 | 698 | 60 | 10 | 30 | 60 | 7500 |
| BR03-12 | 814 | 70 | 12 | 35 | 70 | 8750 |
| BR03-13 | 930 | 80 | 13 | 40 | 80 | 10000 |
| BR03-15 | 1047 | 90 | 15 | 45 | 90 | 11250 |
| BR05-16 | 1163 | 100 | 16 | 50 | 100 | 12500 |
| BR05-19 | 1396 | 120 | 19 | 60 | 120 | 15000 |
| BR05-23 | 1745 | 150 | 23 | 75 | 150 | 18750 |
| BR05-28 | 2093 | 180 | 28 | 90 | 180 | 22500 |
| BR05-32 | 2326 | 200 | 32 | 100 | 200 | 25000 |
| BR05-38 | 2908 | 250 | 38 | 125 | 250 | 31250 |
| BR05-48 | 3489 | 300 | 48 | 150 | 300 | 37500 |
| Specification | Heat exchange load | Heat exchange area | Hot side flow | Cold side flow | |
| KW | Kcal/h | m² | m³/h | m³/h | |
| BR01-1.2 | 116 | 10 | 1.2 | 5 | 2 |
| BR01-2 | 233 | 20 | 2 | 10 | 4 |
| BR01-3 | 349 | 30 | 3 | 15 | 6 |
| BR01-4 | 465 | 40 | 4 | 20 | 8 |
| BR01-5 | 582 | 50 | 5 | 25 | 10 |
| BR01-6 | 698 | 60 | 6 | 30 | 12 |
| BR018-7 | 814 | 70 | 7 | 35 | 14 |
| BR018-8 | 930 | 80 | 8 | 40 | 16 |
| BR018-9 | 1047 | 90 | 9 | 45 | 18 |
| BR018-10 | 1163 | 100 | 10 | 50 | 20 |
| BR03-11 | 1396 | 120 | 11 | 60 | 24 |
| BR03-15 | 1745 | 150 | 15 | 75 | 30 |
| BR03-17 | 2093 | 180 | 17 | 90 | 36 |
| BR03-18 | 2326 | 200 | 18 | 100 | 40 |
| BR03-24 | 2908 | 250 | 24 | 125 | 50 |
| BR03-27 | 3489 | 300 | 27 | 150 | 60 |
| Initial heating time (H) / pool volume (m3) | 8 | 12 | 16 |
| 100 | BR01-3m² | BR01-3m² | |
| 200 | BR01-5m² | BR01-4m² | |
| 300 | BR018-7m² | BR018-6m² | BR018-5m² |
| 400 | BR018-9m² | BR018-7m² | BR018-6m² |
| 500 | BR018-11m² | BR018-9m² | BR018-7m² |
| 600 | BR01-12m² | BR01-11m² | BR01-8m² |
| 800 | BR03-17m² | BR03-14m² | BR03-11m² |
| 1000 | BR03-22m² | BR03-17m² | BR03-13m² |
| 1200 | BR03-25m² | BR03-22m² | BR03-16m² |
| 1500 | BR03-16m²*2 | BR03-13m²*2 | BR03-22m² |
| 1800 | BR03-20m²*2 | BR03-16m²*2 | BR03-11m²*2 |
| 2000 | BR03-22m²*2 | BR03-17m²*2 | BR03-13m²*2 |
| 2500 | BR03-26m²*2 | BR03-22m²*2 | BR03-16m²*2 |
| Heat exchanger selection data sheet | ||||||
| Single phase fluid heat transfer | Heat exchange load (KW) | |||||
Primary side | medium | Secondary side | medium | |||
| Import temperature (°C) | Import temperature (°C) | |||||
| Exit temperature (°C) | Exit temperature (°C) | |||||
| Flow rate (m3/h) | Flow rate (m3/h) | |||||
| Maximum pressure drop (Kpa) | Maximum pressure drop (Kpa) | |||||
| Evaporator and economizer | Heat exchange load | |||||
Primary side | Refrigerant medium | Secondary side | Medium | |||
| Evaporation temperature (°C) | Import temperature (°C) | |||||
| Superheat (°C) | Exit temperature (°C) | |||||
| Flow rate (kg/h) | Flow rate (m3/h) | |||||
| Maximum pressure drop (Kpa) | ||||||
| Cold suspect and waste heat recovery unit | Heat exchange load (KW) | |||||
Primary side | Refrigerant medium | Secondary side | Medium | |||
| Condensation temperature (°C) | Import temperature (°C) | |||||
| Vapor entry temperature (°C) | Exit temperature (°C) | |||||
| Undercooling | Flow rate (m3/h) | |||||
| Flow rate (Kg/h) | Maximum pressure drop (Kpa) | |||||
| Provide us with parameters and contact information so that we can make accurate and timely responses. | ||||||
Working hours: 9:00-18:00
Contact:
Message inquiry:
